卡片電缸
卡片電缸 LAT3
-
?通過線性電機，實現搬運、壓觸式長度測量系統(tǒng)的小型化
?厚度：9mm、重量：130g（行程10mm時）
?最大壓觸推力：6N
?重復定位精度：±5μm
? 壓觸式長度測量精度：±10μm。
?最高使用頻率：500cpm。
| 系列 | 行程（mm） | 傳感器 （光學式線性 編碼器）分辨率 | 壓觸 瞬時最大推力 | 重復 定位 精度 | 壓觸式 測長 精度 | 最高速度 |
|---|---|---|---|---|---|---|
| LAT3F | 10, 20, 30, 50 | 1.25μm | ～6N | ±5μm | ±10μm | 400mm/s |
| LAT3M | 50 | 5μm | ～6N | ±20μm | ±40μm | 400mm/s |
| LAT3 | 10, 20, 30 | 30μm | ～6N | ±90μm | ±100μm | 400mm/s |
產品特點
?The transportation, pushing and length measurement systems have been miniaturized through the use of a linear motor.
?Maximum pushing
force: 6N
Pushing a miniature load
?Positioning repeatability:
± 5 μm
Positioning a workpiece
?Pushing measurement
accuracy: ± 10 μm
Parts measurement
?Maximum operating
frequency: 500 cpm
Rejection of non-conforming products, etc.
?0.5 kg → 1 kg
Just input 3 parameters:
Positioning time, Target
position, Load mass.
|How to Mount
Body Mounting
2 body mounting options
Workpiece Mounting
The table is provided with dowel pin holes for locating the workpiece as standard equipment.
Cable Mounting
The cable connector does not protrude above the actuator.
|Structure and Working Principle
|Start-up time is reduced greatly with a system that is ready-to-use and easy to set up.
The functions described below makes the start-up quick and easy.
Function for measuring and differentiation of workpieces
The size of the workpiece can be measured based
on the table stopping position by driving the table
until it comes into contact with the workpiece.
The workpieces can be differentiated
or checked for quality using parallel
output signals that correspond to
preset table position ranges.
Furthermore, using the multi-counter
makes it possible to display the table
position and output up to 31 preset
points.
|Application Examples
Examples of positioning applications
Sensor head movement and positioning
Component movement and positioning
Electronic component pick and place
Component supply to tape
Component separation (escapement)
Workpiece alignment
Examples of measurement applications
Measurement of workpiece height
Measurement of glass substrate thickness (multiple points)
Measurement of cable outside diameter
Measurement of tape thickness
Examples of high frequency actuation
Alignment of components on pallet by vibration
Distribution of workpieces
Examples of pushing applications
Pushing of workpieces (soft touch)
Positioning of workpieces
Cutting of resin mold component runners
Tape alignment
Switch inspection
High-density layout
